This sets up mail accounts for people who don't have accounts on the FBSD box; e.g. there is a mail account for ole_wobble in the LDAP registry, but no matching account in the Unix passwd file. However, each mail account does require its own directory in /var/mail; e.g. for user Ole Wobble Olson, you need the directory /var/mail/ole_wobble. There is a Unix account named postoffice which handles all administrative tasks and owns the directories and files set up for mail accounts in /var/mail. The group for files in /var/mail is mail. Using ole_wobble as an example:
# ls -l /var/mail | grep ole_wobble drwx--x--x 3 postoffice mail - 1024 Aug 23 04:15 ole_wobble
Mail storage is mbox, but these instructions should work fine with Maildir directories. The UID number for the postoffice account is 3000 and the GID number is 8. Change the ID numbers to match your system.
In each user directory in /var/mail, I create three files: inbox, outbox, and Trash. These are needed for the MUAs (mail clients) we use. Eudora requires the inbox to be "inbox", all lower case; mutt requires the outbox to be "outbox", all lower case, and Eudora uses a trash box named "Trash".
If you want to use raw logging, you will need to add a directory named "dovecot.rawlog" to /home/postoffice.
The OpenLDAP instructions are *extremely* sketchy and are intended only to supplement the instructions at the OpenLDAP web site. They give information specific to a Dovecot setup that is missing from the OpenLDAP manual.
If you have portupgrade installed, the simplest way to install OpenLDAP is by using the portinstall tool.
# portinstall openldap21
The instructions for configuring OpenLDAP, including a Quick Install Guide, are at
OpenLDAP appears to be difficult to install properly. My first two attempts were unsuccessful. The FreeBSD port includes Pearl scripts that run tests to ensure that the installation succeeded. Even though the installation passed the tests, it couldn't be configured to work properly. You may need to install a few times before you get a usable installation of OpenLDAP.
Go to /usr/local/etc/rc.d, and copy slapd.sh.sample to slapd.sh. (Yes, Virginia, there is a slap daemon.) Open the file in a text editor. Ignore the line that says
# Uncomment one of the following:
Comment out the line that says
slapd_args="-u ldap -g ldap"
Save your changes and close the text editor.
Go to the directory containing the OpenLDAP configuration files.
# cd /usr/local/etc/openldap
Make a copy of slapd.conf.default and name it slapd.conf. Open slapd.conf in a text editor. You will need the the following lines to reference the schemas you need:
include /usr/local/etc/openldap/schema/core.schema include /usr/local/etc/openldap/schema/cosine.schema include /usr/local/etc/openldap/schema/nis.schema
The following line will set the default password hashing method to the CRYPT algorithm, which is compatible with Dovecot:
The Quick Install Guide at the OpenLDAP explains how to set up an administrator with global rights on the LDAP registry, and how to add entries. Here is a data hierarchy in ldif format that can be used to provide Dovecot mail accounts. You should be able to copy it into an ldif file, modify it for your own use, and install it all at once.
dn: dc=wibble,dc=net objectClass: top objectClass: dcObject objectClass: organization o: Wibble Corp. dc: wibble description: Wibble, with Ole Wobble and Ole Wubble dn: ou=accounts,dc=wibble,dc=net objectClass: top objectClass: organizationalUnit ou: accounts dn: uid=dovecot,ou=accounts,dc=wibble,dc=net objectClass: top objectclass: person uid: dovecot sn: dovecot dn: uid=ole_wobble,ou=accounts,dc=wibble,dc=net objectClass: top objectclass: person objectClass: posixAccount cn: Ole Wobble Olson uid: ole_wobble uidNumber: 3000 gidNumber: 8 homeDirectory: /usr/home/postoffice dn: uid=ole_wubble,ou=accounts,dc=wibble,dc=net objectClass: top objectclass: person objectClass: posixAccount cn: Ole Wubble Olson uid: ole_wubble uidNumber: 3000 gidNumber: 8 homeDirectory: /usr/home/postoffice
The expression "dc=wibble,dc=net" should match the suffix setting in slap.conf.
If you plan to install this by copying it to a file and running ldapadd, you must retain the blank lines above the lines that begin with "dn: ", but remove any other blank lines.
The uidNumber is set to the uid number of the postoffice account. The gidNumber is set to the gid number of the mail group. The homeDirectory is set to the home directory of the postoffice account. This allows the raw log function to write to that directory. If you don't include the homeDirectory attribute, you will have to apply a patch to Dovecot. The patch is described below, in the Installing Dovecot section. The use of the posixAccount object class requires that you use the uid, cn, uidNumber, gidNumber, and homeDirectory attributes (and therefore shouldn't need the patch).
The home directory is always set to the home directory of the postoffice account. This allows writing raw logs to the postoffice home directory.
To insert the entries above, save them in a file named wibble.ldif. Run ldapadd from the command line:
ldapadd -W -D "cn=Manager,dc=krig,dc=net" -f /usr/local/etc/openldap/wibble.ldif
Returning to slap.conf, the following will give dovecot read access to the entries in the ou=accounts section, but no write access and no access to other parts of the registry.
access to dn.children="ou=accounts,dc=wibble,dc=net" by dn="uid=dovecot,ou=accounts,dc=wibble,dc=net" read by anonymous auth
This is enough to allow Dovecot to authenticate mail users and itself.
The final step in setting up your LDAP registry is to add the passwords. Every account in the ou=accounts section will need one. Assuming that you've slavishly imitated the example in the Quick Install Guide at the OpenLDAP site and called your LDAP administrator "Manager", you can add passwords from the command line with
$ ldappasswd -W -S -D "cn=Manager,dc=krig,dc=net" "uid=dovecot,ou=accounts,dc=wibble,dc=net"
for the dovecot user and
$ ldappasswd -W -S -D "cn=Manager,dc=krig,dc=net" "uid=ole_wobble,ou=accounts,dc=wibble,dc=net"
for mail accounts. The -S option prompts you for the new password, and the -W option prompts you for the LDAP Manager password.
You can view the finished registry with
$ ldapsearch -LLL -W -D "cn=Manager,dc=krig,dc=net" -b "dc=krig,dc=net" "(objectclass=*)"
Again, the simplest approach is the portinstall tool. If you don't include homeDirectory info with your all your LDAP entries, you will need a patch. Download the patch from
To apply the patch, go to /usr/ports/mail/dovecot. If you've previously installed dovecot and still have the work directory, you need to remove it.
# make distclean
Then you need to recreate the work directory.
# make patch
Go to the directory containing the file you need to patch.
# cd /usr/ports/mail/dovecot/work/dovecot-0.99.10/src/auth
Copy auth-no-homedir.patch (the patch file you downloaded) to this directory. Now run patch.
# patch -p0 < auth-no-homedir.patch
If you get no error messages, you can proceed with the installation. If you do get error messages, you will need to apply the patch by hand. Open auth-no-homedir.patch in a text viewer. The file you need to patch is listed in the first line of auth-no-homedir.patch. Open that file in a text editor in another ttyv or xterm.
The path file contains two contiguous lines, the first beginning with a "-" and the second beginning with a "+". The first is the line you will delete from the file to be patched, and the second is the line that will replace it; i.e. subtract the "-" line and add the "+" line. Immediately surrounding the two lines are the context lines; three above and three below. Search for the line in the file to be patched that matches the "-" line *and* has the same context lines above and below. When you find this line, delete it and replace it with the "+" line in the patch file. (Do not include the "+" marker.) Double check that you have deleted only what needs to be deleted and added only what needs to be added. Save the file and close the text editor and text viewer. Delete auth-no-homedir.patch.
Once you have successfully run patch or patched by hand, return to /usr/ports/mail/dovecot. Open the Makefile in a text editor. Find the line that begins with "CONFIGURE_ARGS+=". If you don't have the following two arguments, add them.
Raw logging isn't necessary, but it can be useful. You have to have the --with-ldap argument to enable Dovecot to work with LDAP.
If you remove support for alternative authentication methods (PAM, PGSQL, etc), you should leave support for passwd. When I was debugging my configuration, I found it helpful to switch between passwd and LDAP authentication. If my setup worked with passwd and not with LDAP, then I knew that I needed to look at Dovecot's LDAP configuration, or at OpenLDAP.
Save your changes to Makefile, and close the editor.
Now you're ready to install.
# make install
If make completes and registers Dovecot without giving error messages, then your installation was successful.
To start Dovecot automatically when you boot, go to /usr/local/etc/rc.d and copy dovecot.sh.sample to dovecot.sh.
Go to /usr/local/share/doc/dovecot and copy dovecot-ldap.conf to the /usr/local/etc directory. Go to the /usr/local/etc directory and open dovecot-ldap.conf in a text editor.
The first setting is
hosts = localhost
If Dovecot and OpenLDAP are running on the same machine, then this is fine. If you have OpenLDAP running on a different machine, you will need to set this to the name of the LDAP machine.
dn = uid=dovecot,ou=accounts,dc=wibble,dc=net
This is set to the Distinguished Name that identifies the Dovecot entry in your LDAP registry.
dnpass = flop
Set this to the password you assigned dovecot using the ldappasswd command.
ldap_version = 3
base = ou=accounts,dc=wibble,dc=net
This tells Dovecot where to search in your LDAP registry. Dovecot will search for passwords and UIDs in the entries that fall below ou=accounts in the data hierarchy.
deref = never
If you are referencing and dereferencing aliases, then you know a lot more about LDAP than I do.
scope = subtree
This tells Dovecot to search all entries that fall below the base entry. If it were set to "onelevel", Dovecot would search only entries one level below the base entry. If it were set to "base", Dovecot would search only the base entry.
user_attrs = uid,homeDirectory,,uid,uidNumber,gidNumber
From an e-mail that Timo sent to the list:
- The first uid is the virtual user name that you log in with. For
example firstname.lastname@example.org. The second uid is the system user id which is used to lookup groups from /etc/groups file...You really don't want to have it if you have only virtual users. Two commas mean simply that the value in the middle of them doesn't exist. That'd be the MAIL environment which you can use to override config file's default_mail_env. By default it doesn't exist in LDAP so it's empty.
If you have set up your LDAP registry so that it doesn't supply homeDirectory, uidNumber, and gidNumber (which means that you've applied the homeDirectory patch, you're not using raw logging, you've set default values for uid and gid in this config file, and your LDAP entries don't use the posixAccount object class), you can try the following:
user_attrs = uid,,,uid,,
I haven't tried it, so I can't promise that it works. If you change the default setting, don't remove any of the commas.
user_filter = (&(objectClass=posixAccount)(uid=%u))
Specifies which class to search in a given entry, and to find the uid that matches the user name passed by the mail client.
pass_attrs = uid,userPassword
Which attributes to use when matching passwords.
pass_filter = (&(objectClass=posixAccount)(uid=%u))
default_pass_scheme = CRYPT
If you leave this commented out, Dovecot will automatically detect that OpenLDAP is using CRYPT.
user_global_uid = 3000
This provides a default UID number for LDAP entries that lack the uidNumber attribute. If you use the posixAccount object class in your LDAP registry, you can't enter data for an account without providing a uidNumber and gidNumber, so this and the next setting aren't necessary.
user_global_gid = 8
While still in /usr/local/etc, open dovecot.conf in a text editor.
base_dir = /var/dovecot/
This was created for you during installation.
protocols = imap
You can add other protocols if you want. This setup only uses IMAP.
imap_listen = *:143
You don't need to specify port 143; I just like to be specific. According to the documentation, * causes Dovecot to listen on all available IP4 interfaces. If your IMAP box is also your Internet gateway, and you're not offering mail services externally, then you probably don't want that. You can specify your LAN interface and Dovecot will continue to listen at localhost. If your host name isn't exposed externally, then you can use
imap_listen = wibblemailhost:143
imap_listen = 192.168.15.23:143
ssl_disable = yes
If you have this set to yes, you can ignore the SSL settings that follow in dovecot.conf.
login_dir = /var/dovecot/login login_chroot = yes login = imap login_executable = /usr/local/libexec/dovecot/imap-login login_user = dovecot verbose_proctitle = yes
The above are all part of the default conf file.
first_valid_uid = 3000 last_valid_uid = 3000
If you are assigning the postoffice UID number to all mail accounts, you can restrict access to only that UID number.
first_valid_gid = 8 last_valid_gid = 8
Since all mail accounts are assigned the mail group's number...
valid_chroot_dirs = /var/mail
Another default conf file setting.
default_mail_env = mbox:/var/mail/%u
default_mail_env = maildir:/var/mail/%u
This tells Dovecot where the mail for a given account is located. Dovecot replaces "%u" with the account name. For the two user accounts in the ldif data hierarchy given above, "%u" would expand to ole_wobble and ole_wubble.
client_workarounds = oe6-fetch-no-newmail outlook-idle
We don't use Outlook or Outlook Express. However, someone may decide to use an MS mail client in the future, and leaving this in place does no harm.
mail_save_crlf = yes
My IMAP box really doesn't work very hard, so I don't think it matters how this is set. If your mail server gets hammered regularly, you may want to play with this and see if it makes a difference in speed.
maildir_copy_with_hardlinks = yes
Another performance tweak that doesn't matter to me, but may matter to you. "yes" is supposed to be faster.
mbox_locks = fcntl
I also tried flock and dotlock, and they work FBSD. This is the preferred setting, if it works on your system.
imap_executable = /usr/local/libexec/dovecot/imap auth = default
More default conf file settings.
auth_mechanisms = plain
"plain" seems more likely to work under more circumstances.
auth_userdb = ldap /usr/local/etc/dovecot-ldap.conf auth_passdb = ldap /usr/local/etc/dovecot-ldap.conf
If you need to switch to passwd authentication for testing, change this to
auth_userdb = passwd auth_passdb = passwd /etc/master.passwd
The comments in dovecot.conf make it look like there's supposed to be a colon in there, but this is the correct form.
auth_executable = /usr/local/libexec/dovecot/dovecot-auth
More default conf file settings.
auth_user = dovecot-auth
If you need to switch to passwd authentication for testing, change this to
auth_user = root
auth_verbose = yes
If you have to debug your configuration, you'll want as much information as possible.