This documentation is for Dovecot v1.x, see wiki2 for v2.x documentation.
Differences between revisions 18 and 20 (spanning 2 versions)
Revision 18 as of 2008-08-24 21:01:54
Size: 4560
Editor: 80
Comment:
Revision 20 as of 2008-09-07 09:54:46
Size: 4570
Editor: TimoSirainen
Comment:
Deletions are marked like this. Additions are marked like this.
Line 19: Line 19:
  * With Dovecot v1.0.1 you'll find all of them:   * With Dovecot v1.0.1+ you'll find all of them:
Line 59: Line 59:
'''NOTE''': change the path to the logfile(s) and the master.pid file as appropriate for your system configuration.( please note: normally the master file are in /usr/local/var/run/dovecot/master.pid ) '''NOTE''': change the path to the logfile(s) and the {{{master.pid}}} file as appropriate for your system configuration. The default location of {{{master.pid}}} is {{{/usr/local/var/run/dovecot/master.pid}}}.

TableOfContents

Dovecot Logging

Dovecot always logs a detailed error message if something goes wrong. If it doesn't, it's considered a bug and will be fixed. However almost always the problem is that you're looking at the wrong log file. By default Dovecot logs to syslog using mail facility. You can change the facility from syslog_facility setting. You can also configure Dovecot to write to log files directly, see below.

When using syslog, Dovecot uses 4 different logging levels:

  • info: Informational and debug messages.

  • warning: Warnings that don't cause an actual error, but are useful to know about.

  • err: Non-fatal errors.

  • crit: Fatal errors that cause the process to die.

Where exactly these messages are logged depends entirely on your syslog configuration. Often everything is logged to /var/log/mail.log or /var/log/maillog, and err and crit are logged to /var/log/mail.err. This is not necessarily true for your configuration though.

You can find the correct log files using these methods:

  • Info log: After starting Dovecot, grep "starting up" /var/log/*. It should show a line such as: Dovecot v1.0.0 starting up

  • Error logs: Use dovecot --log-error command, which makes Dovecot log a few messages and exit. Then grep "This is Dovecot's" /var/log/* to find them. You should see:

    • With Dovecot v1.0.0 you'll find only the crit log: This is Dovecot's error log

    • With Dovecot v1.0.1+ you'll find all of them:
      • warning: This is Dovecot's warning log

      • err: This is Dovecot's error log

      • crit: This is Dovecot's fatal log

  • You can also check your /etc/syslog.conf to see how it's configured.

Internal Errors

If IMAP or POP3 processes encounter some error, they don't show the exact reason for clients. Instead they show:

Internal error occurred. Refer to server log for more information. [2006-01-07 22:35:11]

The point is that whenever anything unexpected happens, Dovecot doesn't leak any extra information about it to clients. They don't need it and they might try to exploit it in some ways, so the less they know the better.

The real error message is written to the error log file. The timestamp is meant for you to help you find it.

Changing Log File Paths

If you don't want to use syslog, or if you just can't find the Dovecot's error logs, you can make Dovecot log elsewhere as well:

log_path = /var/log/dovecot.log
# If you want everything in one file, just don't specify info_log_path
info_log_path = /var/log/dovecot-info.log

The error messages will go to file specified by log_path, while everything else goes to info_log_path. If you do this, make sure you're really looking at the log_path file for error messages, since the "Starting up" message is written to info_log_path file.

Rotating Logs

If you change from syslog to an external log file, you can use logrotate (available on most recent linux distros) to maintain the Dovecot logfile so it doesn't grow beyond a manageable size. Save the below scriptlet as /etc/logrotate.d/dovecot:

# dovecot SIGUSR1: Re-opens the log files.
/var/log/dovecot*.log {
  missingok
  notifempty
  delaycompress
  sharedscripts
  postrotate
    /bin/kill -USR1 `cat /var/run/dovecot/master.pid 2>/dev/null` 2> /dev/null || true
  endscript
}

NOTE: change the path to the logfile(s) and the master.pid file as appropriate for your system configuration. The default location of master.pid is /usr/local/var/run/dovecot/master.pid.

Logging verbosity

There are several settings that control logging verbosity. By default they're all disabled, but they may be useful for debugging.

  • auth_verbose=yes enables logging all failed authentication attempts.

  • auth_debug=yes enables all authentication debug logging (also enables auth_verbose). Passwords are logged as <hidden>.

  • auth_debug_passwords=yes does everything that auth_debug=yes does, but it also removes password hiding.

  • mail_debug=yes enables all kinds of mail related debug logging, such as showing where Dovecot is looking for mails.

  • verbose_ssl=yes enables logging SSL errors and warnings. Even without this setting if connection is closed because of an SSL error, the error is logged as the disconnection reason (v1.1+).

None: Logging (last edited 2009-10-28 03:05:44 by TimoSirainen)