This documentation is for Dovecot v1.x, see wiki2 for v2.x documentation.
Differences between revisions 28 and 29
Revision 28 as of 2008-05-26 22:09:15
Size: 4847
Editor: TimoSirainen
Comment:
Revision 29 as of 2008-12-16 15:08:38
Size: 5564
Editor: TimoSirainen
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
== Courier v0.43 and later == == Courier v0.43 and later to Dovecot v1.1+ ==
Line 7: Line 7:
[http://www.dovecot.org/tools/courier-dovecot-migrate.pl courier-dovecot-migrate.pl] attempts to do as perfect migration from Courier as possible. Basically it reads Courier's uidlist files from all maildirs and generates {{{dovecot-uidlist}}} files out of them. If you're using only IMAP, it should work with any Courier version. If you're using Courier POP3 also, it reads {{{courierpop3dsize}}} files using a Courier v0.43+ format. If you have an older Courier POP3 version, see the following sections how to convert the UIDLs. [http://www.dovecot.org/tools/courier-dovecot-migrate.pl courier-dovecot-migrate.pl] does a perfect migration from Courier IMAP and POP3, preserving IMAP UIDs and POP3 UIDLs. It reads Courier's {{{courierimapuiddb}}} and {{{courierpop3dsizelist}}} files and produces {{{dovecot-uidlist}}} file from it. Note that it works properly only with Dovecot v1.1 and later, see the next section for v1.0.
Line 9: Line 9:
Before the actual conversion, you can check how well it can be done: Before doing the actual conversion you can run the script and see if it complains about any errors and such, for example:
Line 12: Line 12:
# courier-dovecot-migrate.pl --recursive
Finding maildirs under .
home/tss/Maildir/courierpop3dsizelist: 2 / 2956 needs changing
home/tss/Maildir/courierimapuiddb: 2956 / 2957 needs changing

Total: 2 POP3 changes, 2956 IMAP changes, 0 errors
# ./courier-dovecot-migrate.pl --to-dovecot --recursive /home
Finding maildirs under /home
/home/user/Maildir/dovecot-uidlist already exists, not overwritten
/home/user/Maildir2: No imap/pop3 uidlist files
Total: 69 mailboxes / 6 users
       0 errors
No actual conversion done, use --convert parameter
Line 19: Line 20:

This means that 2 POP3 UIDLs need to be changed (clients will download them as duplicates) and only one IMAP UID can be converted without changing it. Changing IMAP UIDs isn't as bad, it will only cause a somewhat heavier load to your mail server when the IMAP clients begin downloading the old mails again.
Line 31: Line 30:
courier-dovecot-migrate.pl --quiet --convert ~/Maildir courier-dovecot-migrate.pl --quiet --to-dovecot --convert ~/Maildir
Line 35: Line 34:

== Courier v0.43 and later to Dovecot v1.0 ==

An older version of the [http://www.dovecot.org/tools/courier-dovecot-migrate-1.0.pl courier-dovecot-migrate-1.0.pl] attempts to do as good migration from Courier as possible for Dovecot v1.0. If you're using only IMAP, the migration will be perfect, but with POP3 the IMAP UIDs or POP3 UIDLs may have to be changed.

Before the actual conversion, you can check how well it can be done:

{{{
# ./courier-dovecot-migrate-1.0.pl --recursive /home
Finding maildirs under /home
/home/tss/Maildir/courierpop3dsizelist: 2 / 2956 needs changing
/home/tss/Maildir/courierimapuiddb: 2956 / 2957 needs changing

Total: 2 POP3 changes, 2956 IMAP changes, 0 errors
}}}

This means that 2 POP3 UIDLs need to be changed (clients will download them as duplicates) and only one IMAP UID can be converted without changing it. Changing IMAP UIDs isn't as bad, it will only cause a somewhat heavier load to your mail server when the IMAP clients begin downloading the old mails again.

Courier IMAP/POP3

If you're using only Courier IMAP, it's possible to do a perfectly transparent Dovecot migration. If you're using Courier POP3 and you have users who keep mail in the server, you may have problems keeping the POP3 UIDLs unchanged.

Courier v0.43 and later to Dovecot v1.1+

[http://www.dovecot.org/tools/courier-dovecot-migrate.pl courier-dovecot-migrate.pl] does a perfect migration from Courier IMAP and POP3, preserving IMAP UIDs and POP3 UIDLs. It reads Courier's courierimapuiddb and courierpop3dsizelist files and produces dovecot-uidlist file from it. Note that it works properly only with Dovecot v1.1 and later, see the next section for v1.0.

Before doing the actual conversion you can run the script and see if it complains about any errors and such, for example:

# ./courier-dovecot-migrate.pl --to-dovecot --recursive /home
Finding maildirs under /home
/home/user/Maildir/dovecot-uidlist already exists, not overwritten
/home/user/Maildir2: No imap/pop3 uidlist files
Total: 69 mailboxes / 6 users
       0 errors
No actual conversion done, use --convert parameter

The actual conversion can be done for all users at once by running the script with --convert --recursive parameters. Make sure the conversion worked by checking that dovecot-uidlist files were created to all maildirs (including to subfolders).

You can also convert each user as they log in for the first time, using PostLoginScripting with a script something like:

# WARNING: Be sure to use mail_drop_priv_before_exec=yes,
# otherwise the files are created as root!

courier-dovecot-migrate.pl --quiet --to-dovecot --convert ~/Maildir
# This is for imap, create a similar script for pop3 too
exec /usr/local/libexec/dovecot/imap

Courier v0.43 and later to Dovecot v1.0

An older version of the [http://www.dovecot.org/tools/courier-dovecot-migrate-1.0.pl courier-dovecot-migrate-1.0.pl] attempts to do as good migration from Courier as possible for Dovecot v1.0. If you're using only IMAP, the migration will be perfect, but with POP3 the IMAP UIDs or POP3 UIDLs may have to be changed.

Before the actual conversion, you can check how well it can be done:

# ./courier-dovecot-migrate-1.0.pl --recursive /home
Finding maildirs under /home
/home/tss/Maildir/courierpop3dsizelist: 2 / 2956 needs changing
/home/tss/Maildir/courierimapuiddb: 2956 / 2957 needs changing

Total: 2 POP3 changes, 2956 IMAP changes, 0 errors

This means that 2 POP3 UIDLs need to be changed (clients will download them as duplicates) and only one IMAP UID can be converted without changing it. Changing IMAP UIDs isn't as bad, it will only cause a somewhat heavier load to your mail server when the IMAP clients begin downloading the old mails again.

Dovecot configuration

Courier by default uses "INBOX." as the IMAP namespace for private mailboxes. If you want a transparent migration, you'll need to configure Dovecot to use a namespace with "INBOX." prefix as well.

protocol pop3 {
  pop3_uidl_format = UID%u-%v
}

mail_location = maildir:~/Maildir

namespace private {
  prefix = INBOX.
  inbox = yes
}

Manual conversion

  • Courier's courierimapsubscribed file is compatible with Dovecot's subscriptions file, but you need to remove the "INBOX." prefixes from the mailboxes.

  • Courier's courierimapuiddb file is compatible with Dovecot's dovecot-uidlist file, just rename it.

  • Courier's message flags are compatible with Dovecot (as they are specified by the Maildir specification)
  • Courier's message keywords implementation isn't Dovecot compatible. There doesn't exist a simple way to convert the keywords manually.

Older Courier POP3 versions

Courier version 0
# Courier version 0 (using maildir filenames)
pop3_uidl_format = %f
Courier version 1
# Courier version 1 (UID)
pop3_uidl_format = %u
Courier version 2 and early Courier version 3
# Courier version 2 (UIDVALIDITY and UID - you most likely want this)
pop3_uidl_format = %v-%u

Dovecot v1.0, ManageSieve server and namespaces

Dovecot v1.0's [:LDA:deliver] ignores namespaces, so [:LDA/Sieve:Sieve] scripts shouldn't include namespace prefixes in fileinto destinations. If Sieve scripts are generated by some tool it probably includes these prefixes. If the script is uploaded via [:ManageSieve:ManageSieve server] you can kludge around this problem by using the script below. Dovecot v1.1's deliver doesn't ignore namespaces and this must not be done with it.

First modify managesieve configuration in dovecot.conf to execute your script instead:

protocol managesieve {
  ..
  mail_executable = /usr/libexec/dovecot/managesieve-nsfix.sh
}

Then create the /usr/libexec/dovecot/managesieve-nsfix.sh script:

# by Allan GooD: allan.cassaro (at) gmail.com
export PATH="/bin:/usr/bin"

CONF="/etc/dovecot/dovecot.conf"

/usr/libexec/dovecot/managesieve
ERR=$?

NAMESPACE="`grep prefix $CONF | head -n1 | awk '{print $3}'`"

if [ -h "${HOME}/.dovecot.sieve" ] && [ "${NAMESPACE}" ]; then
  FILE="${HOME}/`ls -l ${HOME}/.dovecot.sieve | awk '{print $11}'`"
  SIEVE="`sed s/${NAMESPACE}/''/g $FILE`"
  echo "${SIEVE}" > ${FILE}
fi

exit $ERR

Note that this script removes everything from the script matching the namespace prefix, so in some rare cases it might break the script.

None: Migration/Courier (last edited 2009-12-05 22:17:08 by kronos)