This documentation is for Dovecot v1.x, see wiki2 for v2.x documentation.
Differences between revisions 1 and 16 (spanning 15 versions)
Revision 1 as of 2007-03-19 02:11:53
Size: 7344
Editor: TimoSirainen
Comment:
Revision 16 as of 2009-02-22 01:49:55
Size: 416
Editor: TimoSirainen
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Dovecot has support for certain types of shared mailboxes. It's not yet possible for users themselves to share their mailboxes, but administrators can create them. Dovecot can support mailbox sharing in several different ways:
 * [:SharedMailboxes/Public:Public mailboxes]
 * [:SharedMailboxes/Shared:Shared mailboxes] between users (using IMAP ACL commands) (v1.2+)
 * [:SharedMailboxes/Symlinks:Symlinking mailboxes]
Line 4: Line 7:
There are two ways to do the actual sharing: Symlinking or defining a namespace. Symlinking is done simply by creating a symlink to destination mailbox in user's mail directory.

== File permissions ==

Both symlinking and namespaces have a common problem: Dovecot needs to have permissions to read, and possibly to write to the shared mailbox.

=== Maildir ===

Unless you're using a single UID for all the users, you'll need to have a {{{dovecot-shared}}} file in each shared maildir. The group and the file permissions for new files inside the maildir are taken from the {{{dovecot-shared}}} file. The file's contents should be empty. So for example:

{{{
# ls -l dovecot-shared
-rw-rw---- 1 root mail 0 2007-03-19 03:12 dovecot-shared
}}}

This makes all the files inside the maildir created with "mail" group and 0660 permissions.

If you create {{{dovecot-shared}}} file to the Maildir root directory, it's copied for all the created child mailboxes.

=== mboxes ===

Since mbox is only a single file which is always modified in-place, you'll only need to make sure that the mbox file's permissions are wide enough to allow your users to read it.

Note that you may have problems with dotlocking. It may be easier to just disable dotlocking completely, but before doing that make sure that it won't cause problems with other software (see MboxLocking). Especially if you symlink a single mbox file elsewhere, the dotlock is now created to the symlink directory, not the mbox file's original directory, so the dotlock is completely useless.

By default Dovecot creates index files into {{{.imap/}}} directory under the mbox file's directory. It may be better for you to explicitly define a separate per-user index file directory, for example:

{{{
mail_location = mbox:~/mail:INDEX=~/mail-indexes
}}}

== Maildir symlinks ==

For example:

{{{
# cd /home/user/Maildir
ln -s "/home/public/Maildir/.Company News ."
ln -s "/home/public/Maildir/.Team News" .
}}}

Note that if a user creates for example "Team News.Child mailbox" it gets created into the user's own Maildir, not into {{{/home/public/Maildir/}}}.

You can also use [http://www.cpan.org/authors/id/G/GH/GHENRY/ create_dovecot_shares] command line tool (latest version in the [http://www.suretecsystems.com/services/ Suretec] [http://www.cpan.org CPAN] directory). There's also a copy of it in [http://dovecot.org/tools/ Dovecot Tools] page.

== Namespaces ==

["Namespaces"] can be used to define more globally shared folders. For example:

{{{
namespace public {
  separator = /
  prefix = Public/
  # This assumes that the user has write access to the directory:
  location = maildir:/var/mail/public
}

# If you create any namespaces, you must also create a namespace
# for your private mailboxes.
namespace private {
  separator = /
  prefix =
  # If you don't set "location" here, it uses the mail_location setting
  #location = maildir:~/Maildir
  # Only one namespace contains the user's default INBOX:
  inbox = yes
}
}}}

In the above example, you could then create maildir folders under the {{{/var/mail/public/}}} directory. For example:

{{{
# ls -la /var/mail/public/
-rw-r-s--- 1 root mail 0 2007-03-19 03:12 .
-rw-rws--- 1 root mail 0 2007-03-19 03:12 .lkml
-rw-rws--- 1 root mail 0 2007-03-19 03:12 .bugtraq
-rw-rw---- 1 root mail 0 2007-03-19 03:12 dovecot-shared
-rw-r----- 1 root mail 0 2007-03-19 03:12 subscriptions
}}}

The set group ID bit in the directories is useful to make sure that if other software than Dovecot creates any files under the directories, they have the mail group instead of the user's primary group.

See the [http://dovecot.org/doc/dovecot-example.conf example configuration file] for more information about ["Namespaces"].

== Read-only Maildirs ==

If your maildir is read-only, the control and index files need to be created under user's own Maildir. You can do this by appending {{{:CONTROL=<path>:INDEX=<path>}}} to mail location.

Note that if you use multiple namespaces, the CONTROL or INDEX paths must point to different directories. Otherwise if the namespaces have identically named mailboxes their control/index directories will conflict and cause all kinds of problems.

If you put the control files to a per-user directory, you '''must''' also put the index files to a per-user directory, otherwise you'll get errors. It is however possible to use shared control files but per-user index files, assuming you've set up permissions properly.

{{{
namespace public {
  separator = /
  prefix = Public/
  location = maildir:/var/mail/public:CONTROL=~/Maildir/control/public:INDEX=~/Maildir/index/public
}
namespace public {
  separator = /
  prefix = Team/
  location = maildir:/var/mail/team:CONTROL=~/Maildir/control/team:INDEX=~/Maildir/index/team
}
# Remember to create a private namespace also.
}}}

=== Delivery agent permissions ===
Make sure the mail delivery agent gets the permissions correct. For example if Procmail is used to deliver mail into a shared Maildir, be sure to set {{{UMASK=007}}} in your {{{.procmailrc}}}, otherwise the new mail will not be group-readable. Also ensure the user running procmail's primary group is correct (''mail'' in the example above).

== Subscriptions ==

When shared namespaces are used to share mailboxes between multiple users, permissions issues can arise on the {{{subscriptions}}} file. By default the {{{subscriptions}}} file is stored in the namespace's mail directory, and the first user to subscribe to a shared mailbox will have ownership of the subscriptions file. If the file isn't readable by other users, no-one else can now list the subscriptions or change the subscriptions. Note that the {{{dovecot-shared}}} file's permissions are not used on the {{{subscriptions}}} file.

Another problem is that although the namespace prefix shows up as a normal looking mailbox, Dovecot doesn't allow subscribing to it because it's not a real mailbox. This will be fixed in later versions.

=== Shared subscriptions ===

If you do want to have all the users subscribed to all the shared mailboxes, you can do this by making the {{{subscriptions}}} file readable and the directory non-writable to the group:

{{{
# ls -la /var/mail/public/
-rw-r-s--- 1 root mail 0 2007-03-19 03:12 .
-rw-r----- 1 root mail 0 2007-03-19 03:12 subscriptions
}}}

Note that the {{{subscription}}} file is always updated by creating a temporary file and renaming it on top of the original, so only the directory's permissions matter, not the {{{subscription}}} file's permissions.

=== Private subscriptions ===

This is only possible with Maildirs.

The {{{CONTROL}}} directive in the mail location setting primarily specifies the directory where to keep several Maildir-specific control files (see ["MailLocation/Maildir"]), but it also specifies the location to {{{subscriptions}}} file. By setting the control directory to a user-specific directory the users can manipulate their own subscriptions.

See "Read-only Maildirs" above for an example how to do this.
See ["SharedMailboxes/Permissions"] for common filesystem related permission problems that are common with all the sharing methods.

Shared mailboxes

Dovecot can support mailbox sharing in several different ways:

  • [:SharedMailboxes/Public:Public mailboxes]

  • [:SharedMailboxes/Shared:Shared mailboxes] between users (using IMAP ACL commands) (v1.2+)

  • [:SharedMailboxes/Symlinks:Symlinking mailboxes]

See ["SharedMailboxes/Permissions"] for common filesystem related permission problems that are common with all the sharing methods.

None: SharedMailboxes (last edited 2010-08-24 16:28:28 by TimoSirainen)